Gallery


Speed-Commander™ 1200 Dock-Master / Screen-Master

The Speed-Commander™ 1200 Dock-Master / Screen-Master is a heavy duty roll-up door intended for low-frequency use and is a perfect fit for applications need the convenience of a high performance door without requiring a high cycle door.

Designed to be raised or lowered with a contant pressure push button at a speed of 14" per second, it is perfect for door openings where overhead and sectional doors are installed. Standard operation is hold to open / hold to close, and when automatic closing is required, an optional built-it light grid is included.


Speed-Commander™ 1400 SEL

The Speed-Commander™ 1400 SEL is ideal for interior doorways up to 14'0" wide x 16'0" high in the following applications: pharmaceutical, hospitals, beverage, manufacturing, commercial buildings, general industry and more.

Standard on the Speed-Commander™ 1400 SEL is a light grid built into the guide tracks up to 8'0" high. Completely free of coil cords, the light grid provides a thorough wall of protection for personnel and equipment at the doorway. A SoftEdge bottom profile with wireless breakaway switch simplifies installaton, reduces maintenance and minimizes risk of damage to the door.

 
 
 
 
 

Speed-Commander™ 1400 SEL Clean-Master 20 Pa

The Clean-Master 20 Pa is specially made for clean room applications and tightly seals door openings to prevent air movement.

The fast opening speed of up to 80" per second greatly increases protection from contamination between two areas. Low-profile steel guide tracks are free of moving parts, promoting a pure environment. Stainless steel guide tracks are available for customers that demand the ultimate in clean.


Speed-Commander™ 1400 SEL Cool-Master

This is the ideal door for energy conscious, 24/7/365 applications in agricultural, medical and cooler distribution facilities.

An advanced 3 mm thick gray foam panel material maintains flexibility to +33 degrees F and helps to keep condensation to a minimum in cooler to ambient areas.  Our unique sectional panel design makes it possible to replace panels easilty for minimal downtime.


Speed-Commander™ 1400 SEL Food-Master

The Speed-Commander™ 1400 SEL Food-Master for interior door openings up to 14'0" wide x 16'0" high, is designed to allow you to select only the stainless steel options your application requires.

Able to conform with all industry requirements, the following components are available in stainless steel, making it possible to conveniently build a Food-Master door without paying for unnecessary stainless options:  Roll tube / shaft, door / motor cover, guide tracks and all hardware. A light grid built into the guide tracks is standard equipment, and amazingly, the light grid remains an effective protection device even following a wash-down.


Speed-Commander 1400 MP Machine Protection

SC 1400 MP machine protection doors effectively separate equipment from work areas.

Our SC 1400 MP machine protection doors effectively separate equipment from work areas for protection of personnel. Class 4 safety switches signal that the door is verified closed. The SC 1400 MP is available for openings up to 10'0" wide x 10'0"  high.


Speed-Master® 1600 L

The Speed-Master® 1600 L is designed for door openings up to 14'0" wide x 16'0" high. Manufacturing and industrial markets rely on the 1600 L to maintain environmental control in tough environments.

Designed for interior and exterior door openings up to 14'0" wide x 16'0" high, the 1600 L has heavy duty 12 gauge hot-dipped galvanized steel tracks that are a two-piece design.  The front covers conveniently open for ease in re-setting the door when required.

 
 

Speed-Master® 1600 XL

The Speed-Master® 1600 XL is uniquely designed for large exterior or interior door openings (Minimum opening size 14'0" wide x 16'0" high, up to 20'0" wide x 20'0" high).  The 1600 XL is the choice for applications where the door opening size prevents use of a Speed-Master® 1600 L, but budget requirements won't permit moving up to a Speed-Master® 2600 L.


Speed-Master® 2600 L

For door openings up to 20'0" wide x 24'0" high, the Speed-Master® 2600 L is a popular choice of plant engineers and maintenance managers because of its proven track record for sustainability.

A light grid is built into the guide tracks which provides a thorough wall of protection for personnel and equipment in the doorway.  The light grid also eliminates the need for a panel reversing edge, which is typically vulnerable to damage, resulting in a reduction in maintenance and downtime.

 

Speed-Master® 4600 L

Extra large door openings up to 32'0" wide demand nothing less than the Speed-Master® 4600 L. Warehouses, mass transit garages, waste management facilities and many other industries with extreme environments trust the proven performance of the 4600 L.

The 4600 L is constructed of interlocking aluminum hinges which act as integral windbars, creating a sectional panel design that provides panel stabililty and increased wind resistance.

 
 
 
 
 

Rubber doors

The rugged and dependable construction of the 4600 R Series is why they are the choice high performance rubber door for environmental control in harsh applications such as mining, transportation, waste management and manufacturing.

Three models are available depending on the number of anticipated cycles.  The 4600 RE (economy) is a springless design for use in applications having a low number of cycles.  The 4600 RS (standard) and 4600 RD (deluxe) both operate using a direct-drive operation.  The SBR panel material is standard on all models , maintenance free, and maintains performance in a temperature range of -40 degrees F to +180 degrees F.  The robust panel along with one-half inch thick windlocks keep the panel in place with wind pressure up to 88 mph.  Heavy-duty structural steel guide tracks are low-profile, occupying only 4" on each side of the door opening.

 
 
 
 
 
 

Speed-Guardian™ Series High Performance Rigid Security Door

For exterior or interior locations in auto retail, condos and secure parking garages, the Speed-Guardian™ secure high speed roll up door with urethane panel sections provides the most efficient U-value available today.

Exclusive Duratec® insulated windows are coated with a special finish which prevents marks and scratches caused by cleaning.  The windows retain a clear view after many cleanings and with heavy duty use.

 

Steel Ranger™ 9000 L High Performance Rigid Rolling Steel Door

The Steel Ranger™ 9000 L is a class above traditional rolling steel doors.  With a windload rating up to 88 mph, direct-drive, springless operation, extremely strong Decotherm® panel and fast operating speeds, this revolutionary high performance rolling steel door is the model to choose as an alternative to traditional rolling steel doors in high cycle applications.

A direct-drive, springless design enables us to include an exciting 500,000 cycle warranty, ensuring dependable, maintenance-free operation that progressive companies desire.  Competitive models have springs with a 20,000 cycle capability as standard.


Retail Automotive

Energy efficient and attractive - Fast operating speeds enhance comfort and security. The Speed-Guardian™ is the high speed door with the outstanding aesthetic appeal many new car dealerships desire.

Service entrance and exit door openings at new car dealerships are ideal locations for the Speed-Guardian™, providing excellent thermal benefits for helping to create a comfortable workplace for employees. 

 
 
 
 
 
 
 

Fire Stations

Great-looking, secure and highly energy efficient - Fast operating speeds allow for quick exits. The Speed-Guardian™ is the high speed door with the outstanding aesthetic appeal more fire stations are including in remodels & new construction.

Entrance and exit door openings at fire stations are ideal locations for the Speed-Guardian™, providing outstanding thermal benefits to create a comfortable workplace for employees, and its fast opening speed allows for quick exit of emergency vehicles.

 
 
 
 
 
 

Parking

The Speed-Guardian™ 4000 high speed security door easily provides the security and efficiency necessary for installation in parking garages in condominums, banks and government buildings.

The 4000's attractive appearance coordinates with any architectural design and color scheme.  A highly insulated panel with an R-value of 13.6 and U-value of < 0.5 delivers maximum energy efficiency.  Double pane windows have an exclusive, scratch-resistant Duratec® coating so that windows maintain clarity, and perforated vision slats are available when ventilation is required.  A super fast opening speed of up to 80" per second helps keep energy costs down.

 
 

Transportation

The rugged and dependable Speed-Master® 4600 stands up to the demands of busy transportation applications.

The direct-drive motor provides the reliability and sustainability required by transportation applications.


Waste Management

The fastest door in its class, the Speed-Master® 4600 out performs competitive high speed roll-up doors in demanding applications such as waste management, parking garages and general industry.

The fast operating speed of the 4600 is able to keep up with the busy traffic conditions that are typical at waste processing operations.